Vauxhall Workshop Service and Repair Manuals

Quick Survey  

The following quick survey shows the individual work steps used for plastic repairs.  

Step A - Consult service literature / safety measures

A1 - Consult service literature

A2 - Observe safety measures

Step B - Prepare consumables, tools

B1 - Prepare adhesive set, structure spray, special service tool

B2 - Prepare workplace

Step C - Prepare parts

C1 - Remove and clean damaged components

C2 - Drill ends of crack

C3 - Prepare damaged area

C4 - Blow off component

C5 - Prepare clamp

C6 - Clean damaged area

Step D - Repair damaged area

D1 - Apply primer to damaged area

D2 - Adapt fibrous web, contour foil

D3 - Prepare adhesive set

D4 - Apply adhesive in concealed area

D5 - Fix part in position

D6 - Apply adhesive in visible area

D7 - Sculpt outer contour

D8 - Dry damaged area

Step E - Restructure surface

E1 - Remove contour foil

E2 - Sand visible area

E3 - Apply structure spray

E4 - Carry out paint repair

Step F - Environmental protection

F1 - Disposal

Operation Steps - Details