Operational procedure
|
Paint stage
|
Products
|
Notes
|
|
I
|
II
|
III
|
|
|
Clean
|
x
|
x
|
x
|
Silicone remover
Aqueous degreaser
|
Spray on using pump atomiser and dry with a cloth.
|
Sand
|
x
|
x
|
x
|
Dry eccentric grinding
|
Sand out defect area, P80, P180, P320 grain. Roughen remaining
area using P320.
|
Putty application
|
x
|
–
|
x
|
Polyester universal putty
|
Apply universal putty to sanded-down bare metal areas only.
|
Sand
|
x
|
–
|
x
|
Dry sandpaper
|
Only grind polyester universal putty when dry.
|
Clean
|
x
|
–
|
x
|
Aqueous degreaser
|
Spray on using pump atomiser and dry with a cloth.
|
Apply filler
|
x
|
–
|
x
|
Depending on colour of car
2-C HS filler
CR wash primer (ALU and Zn only)
|
Spray one to three layers of filler. Setting time 3 minutes.
Painting stage II includes minor repairs without putty application.
Multi-use only at sanded-down areas for purposes of insulation.
|
Sand
|
x
|
–
|
x
|
Dry sanding
Wet sanding
|
P320 to P360
Not less than P800
|
Clean
|
x
|
x
|
x
|
Aqueous degreaser
|
Spray on using pump atomiser and dry with a cloth.
|
Spray top coat paint
|
x
|
x
|
x
|
VOC coat
100 parts of coat
50 parts of hardener
25 parts of thinner
|
Spray one thin layer. No intermediate flash drying. Final
spraying with one more layer. Setting time 1 to 3 minutes before
oven drying.
|