Upholstery/Cushion - Front Seat Backrest, Remove and Install
 Remove, Disconnect Front seat backrest - see operation "Front Seat Backrest, Remove and Install". Prise off adjustment knobs for lumbar support adjustment, guide sleeves, lower upholstery, upholstery reinforcement, side upholstery. For vehicles with side airbag: Remove side airbag - see operation "Side Airbag, Remove and Install". Detach rod, lumbar support (1), front seat backrest frame, detach cushion from upholstery. | 
|
Notice: The Aftersales division provides the previous upholstery until they are all used. After they have all been used, only upholstery covers with cut-out marks for the side airbag (1) and the adjustment knob for the lumbar adjustment (2) will be available. The installation cut-outs for the side airbag (3) and the adjustment knob for the lumbar adjustment (4) must be cut out by hand using the indents on the new upholstery. A suitable tool for this purpose is a punch (12 mm diameter) for the rounded sections of the side airbag and a blade. When making the installation cut-outs, ensure the correct side, because the indent is provided on both sides of the upholstery. | 
|
 Install, Connect Cushion to upholstery, front seat backrest frame, lumbar support, attach rod, side airbag, upholstery at side, upholstery reinforcement, upholstery at bottom, guide sleeves. Adjustment knobs, front seat backrest.
|
