Inner Panelling - B-pillar, Remove and Install
Remove, Disconnect With optional equipment "anti-theft warning system", lever off sensor and disconnect plug connection. Remove upper B-pillar inner panelling, seat belt from seat - see operation "Seat Belt - Front, Remove and Install". Detach front door weatherstrip. Thread seat belt through inner panelling of upper B-pillar. Loosen sill inner panelling (1). Lower B-pillar inner panelling, unclip guide for seat belt.
Install, Connect |
|
Insert seat belt in guide and close guide. Inner panelling, lower B-pillar. Sill inner panelling, thread seat belt through upper B-pillar inner panelling. Seat belt, upper B-pillar inner panelling, anti-theft warning system sensor, front door weatherstrip.
Tighten (Torque) Seat belt to front seat - 20 Nm / 15 lbf. ft. |
|
|