Vauxhall Workshop Service and Repair Manuals

 

Seat Belt - Rear Centre (Three-point Belt), Remove and Install     Remove, Disconnect    Remove rear seat backrest - see operation "Rear Seat Backrest, Remove and Install".   Partially remove seat cushion - see operation "Upholstery/Cushion - Rear Seat Backrest, Remove and Install".   Notice:  Upholstery remains on cushion.   Detach centre seat belt bracket (1).   Detach Bowden cable reel retractor at rear seat backrest release (2).   Unscrew reel retractor for rear seat backrest (3) and thread out through cushion (4).     Important!    Secure belt fabric from rolling up completely. The centre three-point belt cannot function if the rear seat backrest has not been folded back completely!

  Install, Connect   

Reel retractor to rear seat backrest (3) - torque 35 Nm / 26 lbf. ft.   Belt fabric in upholstery (4).   Bowden cable reel retractor to rear seat backrest release (2).   Centre seat belt bracket (1) to rear seat backrest - torque 20 Nm / 15 lbf. ft.   Attach seat upholstery - see operation "Upholstery/Cushion - Rear Seat Backrest, Remove and Install".   Install rear seat backrest - see operation "Rear Seat Backrest, Remove and Install".