vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Lower Control Arm and/or Damping Bushing, Remove and Install > < Damping Bushing in Trailing Link - Rear/Upper and Rear/Lower, Replace replacement

Vectra B

 

Damping Bushing in Trailing Link, Front, Replace  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Remove trailing link bracket - see operation "Trailing Link Bracket, Remove and Install". Clamp trailing link in vice with protective jaws. Draw out damping bushing with KM-906-70 (3), KM-906-41 (1) and KM-906-44 (2).  

Object Number: 616201 Size: DEFAULT  Important!   

Insert new damping bushing (4) as shown.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Carefully pull in damping bushing with KM-906-70 (3), KM-906-43 and KM-906-42 (5). Install trailing link bracket - see operation "Trailing Link Bracket, Remove and Install".  

Object Number: 2393624 Size: DEFAULT
Related Literature Units
-

Lower Control Arm and/or Damping Bushing, Remove and Install > < Damping Bushing in Trailing Link - Rear/Upper and Rear/Lower, Replace replacement