Disconnect rear wheel. Disconnect protective panelling in wheel well. Unscrew fastening bolt (1). Unscrew fastening bolts (2) and remove spring strut.
Install, Connect Attach spring strut with fastening bolts (2) to wheel well side. Attach spring strut with new fastening bolt (1) to trailing link. Install protective panelling in wheel well. Attach rear wheel.
Torque - Angle Method Spring strut to wheel well - 55 Nm / 41 lbf. ft. Spring strut to trailing link - 150 Nm / 111 lbf. ft. + 30 ° + 15 ° . Wheel to wheel hub - 110 Nm / 81 lbf. ft. |