vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Valve Bridges, Remove and Install > < Illustration - Engine Compartment Vacuum Routing

Vectra B

 

Heater Element Temperature Sensor, Remove and Install  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Disconnect rubber seal (1) from plenum chamber.  

Open service aperture (2).  

Disconnect wiring harness plug from heater element temperature sensor (3).  

Detach add-on heater temperature sensor (3) with bracket (4) from clean air filter housing.  

Unclip heater element temperature sensor from retaining clips (arrows).  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Clip add-on heater temperature sensor in bracket.  

Attach heater element temperature sensor to clean air filter housing together with bracket.  

Connect wiring harness plug to heater element temperature sensor.  

Close service aperture.  

Attach rubber seal.  

Object Number: 2399965 Size: DEFAULT

Valve Bridges, Remove and Install > < Illustration - Engine Compartment Vacuum Routing