Vauxhall Workshop Service and Repair Manuals

Oil Pressure, Check  

Check engine oil level, if necessary correct.  

  Remove, Disconnect   

Remove lower engine compartment cover.   Detach wiring harness plug (1) from oil pressure switch.   Detach oil pressure switch (2) from cylinder block - collect escaping engine oil.     Inspect    Check oil pressure with KM-498-B (3) and KM-135 (4). When engine is idling, minimum oil pressure is 150 kPa (1.5 bar) and oil temperature is ≥ 80 ° C.     Install, Connect    Attach oil pressure switch to cylinder block with new seal ring - tightening torque 30 Nm / 22 lbf. ft.   Connect wiring harness plug to oil pressure switch. Install lower engine compartment cover.   Check engine oil level, if necessary correct.