Vauxhall Workshop Service and Repair Manuals

Oil Pressure Regulating Valve, Remove and Install  

  Remove, Disconnect   

Remove oil pan - see operation "Oil Pan, Remove and Install".   Remove closure bolt (1) from timing case - remove seal ring (2), pin (3) spring (4) and piston (5).     Clean    Clean all parts, check for wear and replace if necessary.     Install, Connect    Insert pin, spring and piston in timing case - ensure installation position is correct!   Attach closure bolt to timing case with new seal ring - tightening torque 60 Nm / 44 lbf. ft.   Install oil pan - see operation "Oil Pan, Remove and Install".