Starter
Starter, Remove and Install (X 16 SZR)
Remove, Disconnect
Remove cable connections (1) and (2) from starter.
Remove ground cable (4).
Remove fastening nut (3) and fastening bolt (5) and remove starter downwards.
Install, Connect
Attach starter to transmission. Install fastening nut (3) - tightening torque 45 Nm / 33 lbf. ft.
Install fastening bolt (5) - tightening torque 25 Nm / 18 lbf. ft.
Attach ground cable and cable connections to starter - ensure correct cable routing.
Remove, Disconnect 
Install, Connect 