Solenoid Valve - Switchover Valves (Inlet Manifold), Remove and Install (X 18 XE, X 20 XEV) Notice: Illustration F 9767 shows the inlet manifold in the removed state for a clearer representation.
Remove, Disconnect Pull wiring harness plug and vacuum hose from switchover valve solenoid valve. Loosen fastening bolt (1) and remove fastening bolt (2). Remove switchover valve solenoid valve with bracket and detach from bracket.
Install, Connect Push switchover valve solenoid valve onto bracket and attach to inlet manifold. Attach wiring harness plug and vacuum hoses to switchover valve solenoid valve. |