Crankshaft Out-of-round, Check
Remove, Disconnect
Remove crankshaft bearing cap from cylinder block - mark installation position.
Measure
Attach Dial Gauge MKM-571-B with dial gauge bracket to cylinder block. Attach probe of Dial Gauge MKM-571-B to crankshaft bearing journal. Turn crankshaft uniformly. Max. out-of-round: see "Technical Data".
Install, Connect
Remove dial gauge bracket with Dial Gauge MKM-571-B.
Attach crankshaft bearing cap with new fastening bolts to cylinder block - tightening torque 50 Nm / 37 lbf. ft. + 45 ° +15 ° .