vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Seal Ring - Rear Crankshaft, Replace > < Seal Ring - Rear Camshaft Housing, Replace (16 LZ2)

Vectra B

 

Gasket - Rear Camshaft Housing, Replace (20 NEJ)  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Remove DIS ignition module - see operation "DIS Ignition Module, Remove and Install (20 NEJ)".  

Remove pressure plate cover (1) from camshaft housing.  

Object Number: 616195 Size: DEFAULT  Clean   

Remove gasket remnants and clean sealing surfaces.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Attach pressure plate cover with new gasket to camshaft housing - tightening torque 8 Nm / 6 lbf. ft.  

Install DIS ignition module - see operation "DIS Ignition Module, Remove and Install (20 NEJ)".  

Object Number: 2387635 Size: DEFAULT

 

 
Related Literature Units
-

Seal Ring - Rear Crankshaft, Replace > < Seal Ring - Rear Camshaft Housing, Replace (16 LZ2)