Secondary Air Combination Valve, Remove and Install (X 16 XEL) (X 16 SEJ, X 16 XEL)
Secondary Air Combination Valve, Remove and Install (X 16 XEL)
Remove, Disconnect
Disconnect vacuum hose (1) and air guide hose (2) from secondary air combination valve.
Notice:
Mark secondary air combination valve (3) installation position!
Remove fastening bolts (4) from secondary air combination valve and remove secondary air combination valve from secondary air metal pipe.
Clean
Remove gasket remnants, clean sealing surfaces.
Install, Connect
Attach secondary air combination valve (3) with new gasket to secondary air metal pipe, at the same time note identification made previously. Attach air guide hose and vacuum hose to secondary air combination valve.
Tighten (Torque)
Secondary air combination valve - 6 Nm / 4 lbf. ft.