Vauxhall Workshop Service and Repair Manuals

C-22, Sliding roof/window circuit  

C-22, Sliding roof/window circuit
Test	Instructions		Nominal value
T01	Measure resistance
	•  Separate body wiring harness plug & driver's door X15   •  Disconnect wiring harness plug (28 pin) from anti-theft warning system control unit & central door locking K94   •  Measure resistance between wiring harness plug X15/terminal 21 and wiring harness plug K94/ter. 24		Lower than 2 Ω
	Yes:   T02	No:   E01
T02	Measure resistance
	•  Disconnect wiring harness plug from sliding roof module M13   •  Disconnect wiring harness plug (28 pin) from anti-theft warning system control unit & central door locking K94   •  Measure resistance between wiring harness plug M13/terminal 4 and wiring harness plug K94/terminal 24		Lower than 2 Ω
	Yes:   E03	No:   E02

C-22, Sliding roof/window circuit
No.	Result
E01	•  Interruption in lead between body wiring harness plug & driver's door X15/terminal 21 and anti-theft warning system control unit wiring harness plug & central door locking K94/terminal 24
E02	•  Interruption in lead between sliding roof module wiring harness plug M13/ter. 4 and anti-theft warning system control unit wiring harness plug & central door locking K94/terminal 24
E03	•  Anti-theft warning system control unit & central door locking K94 defective
	or
	•  Sliding roof module defective
	or
	•  Fault in the window winder circuit (see electronic window winder checking procedure)