Luggage compartment lid inner panelling - see operation "Inner Panelling - Luggage Compartment Lid, Remove and Install - Model F19" in group "C". Disconnect wiring harness plug (1). Depending on the equipment version, release one or two wiring harness plugs (2 and 3) from central locking servo motor and detach. Release retaining clips (arrows) - for the reinstallation, tie a cord to the end of the wiring harness. Detach cover (4) and pull wiring harness downwards from luggage compartment lid.
Install, Connect Draw wiring harness in luggage compartment lid and fasten. Install cover (4) and connect wiring harness plugs (1, 2 and 3). Install luggage compartment lid inner panelling. |
|