volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Door Panel, Removing and Installing|Page 7839 > < Door Panel, Removing and Installing|Page 7837
Page 10
background image

-

Removal and installation is described for right side of vehicle. The same instructions apply for removal and installation for the left-hand side.

-

Obtain security code for radio with anti-theft coding before disconnecting battery Ground (GND) strap

Removing

-

Switch ignition off.

-

Disconnect battery ground (GND) strap

Removing handle trim

-

Insert flat screwdriver between handle trim - 1 - and handle and carefully press handle trim off door trim

Removing window crank handle

-

Slide spacer ring - 1 - in - direction of arrow - (securing clip is released) and pull window crank from mechanism.

-

Remove three bolts - arrows -.

-

Unclip door trim - 1 - at the sides using Pliers 3392

-

Lift door trim upward out of window recess seal.

Door Panel, Removing and Installing|Page 7839 > < Door Panel, Removing and Installing|Page 7837