Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-1671002.png)
-
Loosen bolts -2- and press clamps apart.
-
Push window upward and secure in position (e.g. with adhesive tape).
-
Remove operating lever for hood lock (drivers side only).
-
Remove A pillar lower trim.
-
Disconnect multi-pin connectors -1- on A pillar -2-.
-
Take cover -1- for wiring harness -2- out of body opening in the inner A pillar.
-
Pull wiring harness out of A pillar at boots -1- between door and A pillar.
