Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-1682003.png)
-
Remove plugs - 3 -.
-
Remove combination nut - 2 -.
-
Unclip window recess cable.
-
Move window regulator to center of door and remove.
Installing
-
Installation is performed in the reverse order of removal.
Subframe, Removing and Installing
Subframe, Removing And Installing
Window regulator, door lock and loudspeaker are secured to subframe.
Door lock can only be removed in conjunction with subframe.
Subframe can only be removed when the door window has been unscrewed at clamping brackets of window regulator. For this purpose, door window
must be driven down to height of installation holes in subframe and clamping brackets loosened.
If it is not possible to drive down the door window by the electrical window regulator, first the exact cause of malfunction must be determined.
To do so, check DTC Memory of comfort system (address word 46) using Fault Read Out Device V.A.G 1551,
If electrical malfunction is present, repair this malfunction first.
If window regulator motor is cause for malfunction, proceed according to description.
Removing
-
Remove front door trim
-
Remove lock cylinder housing.
