Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-1695007.png)
^
Loosen window regulator clamp bolts but DO NOT remove.
Care must be taken to properly secure the glass in the window frame once the window regulator clamps are separated from the window. This will prevent
window from falling into door.
^
Pull glass free of rubber isolators and remove glass.
^
Remove rubber isolators, see Repair Manual Group 64, Glass, Window regulators, Door windows.
^
Scuff each rubber isolator, where they contact glass, with 120 grit sand paper to remove gloss.
^
Clean scuffed area with 3M(R) General Purpose Adhesive Cleaner Part No: 08987. See -> Required Parts and Tools
^
" Apply a 10 mm diameter spot of 3M(R) Channel Bonding and Sidelite Adhesive, Part No. 08641, see MACROBUTTON MB_EditRef ->
MACROBUTTON MB_EditRef -> -> Required Parts and Tools, to one side of the rubber each isolator.
