Beetle L4-1.9L DSL Turbo (ALH) (1998)
Hood Latch Release Cable: Service and Repair
Hood Release Cable, Removing And Installing
1
-
Hood release cable
-
Removing:
-
Remove operating lever and unclip hood release cable on lock and in engine compartment.
-
Remove lower A-pillar trim:
-
Secure a welding wire or similar - approx. 1000 mm in length on cable nipple (operating lever) and pull out cable from engine
compartment side.
-
Installing:
-
Use welding wire or similar as auxiliary pulling tool.
2
-
Sealing grommet
-
2x
3
-
Expanding nut
4
-
Operating lever
5
-
Sheet-metal screw and washer assembly
6
-
Mounting bracket
-
Cable engaged
7
-
Nut
8
-
Bracket (convertible)
9
-
Hood release cable bracket
10
-
Hood lock