Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Inspect underside of cover for tape or felt at both front radii (arrows).
If tape is found along radii:
-
Remove tape and apply felt as described below.
If no tape or felt is found:
-
Cut two pieces approx. 125 mm x 11 mm from Part No: 533 867 910A (adhesive felt).
-
Apply one felt strip at both front corners of panel (edge of felt must line up with edge of panel).
-
Reinstall panel.
Note:
Felt must NOT protrude beyond outer edges of panel (arrows). If allowed to protrude, felt will be visible once the panel is installed.
Left or right plenum panel cover Squeaking/rattling from left or right plenum panel cover.
-
Remove center cover.