Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-1870002.png)
-
Remove six bolts - 1 - on left and right at upper edge of rear lid - 2 -.
-
Disengage sealing grommets - 1 - on left and right of lid - arrow -.
-
Open clips - 1 - at left and right.
NOTE: Replace damaged clips - 1 - when installing.
-
Remove rear spoiler installation unit from vehicle. To do so, disengage from clip - 1 - and pull apart lower guide tube - 2 - and upper guide tube -
3 - when removing rear spoiler installation unit.
-
When removing rear spoiler installation unit, pull cables - 4 - on left and right out of lower guide tube - 2 -.
Installing
-
Installation is performed in the reverse order of removal.
Additionally, the following work steps must be carried out:
