Beetle L4-1.9L DSL Turbo (ALH) (1998)
Brake Caliper: Service and Repair
Caliper Piston Removing and Installing
FN 3 Brake Caliper
Front Caliper Piston, Removing And Installing
Special Tools And Equipment
^
3409 Wedge
^
Piston resetting tool
Removing
-
Force piston out of brake caliper housing using compressed air.
CAUTION!
^
Place a piece of wood in the recess to prevent damaging the piston.
^
Use only enough air pressure to force piston out.
WARNING!
^
Always wear safety goggles when working with compressed air.
-
Remove seal using wedge 3409.
CAUTION!
^
When removing, use care to ensure that the cylinder bore is not damaged.
Installing
-
Install new piston seal in caliper.
-
Lubricate piston and cylinder bore lightly using brake fluid.