Beetle L4-1.9L DSL Turbo (ALH) (1998)
3. 25 Nm (18 ft. lbs.)
4. Chain
5. Sealing flange
6. 15 Nm (11 ft. lbs.)
7. Chain tensioner (with tensioning rail)
^
15 Nm (11 ft. lbs.)
^
To installs first pretension spring
8. Dipstick
^
Oil level must NOT be above the MAX. mark!
9. Guide
^
Remove to draw out oil
10. Guide tube
11. Centering dowels
12. O-ring
^
Always replace
13. Suction pipe
^
Clean strainer if soiled
14. Baffle plate
15. Oil pan
^
Clean sealing surfaces before installing
^
Install with silicone sealant D 176 404 A2
16. Seal
^
Integral with oil drain plug
17. Oil drain plug
^
30 Nm (22 ft. lbs.)
^
Replace if leaking. See Parts Supplier for correct application. In some cases seal and drain plug are combined; do not interchange with separate
seal and drain plug.
Part II
1. Sealing plug
^
25 Nm (18 ft. lbs.)
2. Gasket