Beetle L4-1.9L DSL Turbo (ALH) (1998)
One hole 12.5 mm (arrow) drilled in the 10-222 A/21 guide
Toothed Belts, removing
-
Remove tube between charge air cooler and Air intake pipe. Refer to: "Powertrain Management : Turbocharger : Service and Repair"
See: Powertrain Management/Fuel Delivery and Air Induction/Turbocharger/Service and Repair
-
Disconnect fuel supply and return lines at fuel filter.
-
Remove fuel filter from bracket.
-
Remove toothed belt guard - upper section.
-
Remove valve cover.
-
Remove brake booster vacuum pump.
-
Remove pipe between charge air cooler and turbocharger. Refer to: "Powertrain Management : Turbocharger : Service and Repair" See:
Powertrain Management/Fuel Delivery and Air Induction/Turbocharger/Service and Repair
-
Remove insulation tray - right side
-
Remove ribbed belt. Refer to: "Engine : Drive Belt : Service and Repair" See: Drive Belts, Mounts, Brackets and Accessories/Ribbed
Belt/Service and Repair
With Engine Installed:
-
Turn crankshaft to cylinder 1 TDC.
-
Turn crankshaft to cylinder 1 TDC.
With Engine Removed:
Vehicles with Manual Transmission