Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Main fuses OK.
-
Fuses No.29, 32, 34 and 43 OK.
Prerequisites (with air conditioning)
-
Vehicle at room temperature, warmer than +15 °C (59 °F)
-
A/C on
-
Lowest temperature setting and highest blower speed
NOTE:
-
Activation of individual control elements is limited to 30 secs. but can be stopped at any time by pressing -> button.
-
Final controls are checked acoustically or by touching.
-
Ignition must be switched off before repeating Output Diagnostic Test Mode.
Work sequence
-
Connect Scan Tool (ST) V.A.G 1551/(VAG 1552).
-
With engine idling, select Engine Control Module (ECM) with "Address word" 01.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Operate Scan Tool (ST) and advance through program sequence by following display.
-
Press buttons -0- and -3- for "Output Diagnostic Test Mode" (DTM).
Activating Cold Start Injector -N108-:
Indicated on display: