Beetle L4-1.9L DSL Turbo (ALH) (1998)
Engine Control Module: Service and Repair
Engine Control Module (ECM), Coding
Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) -J248-, Coding
Engine Control Module (ECM), coding
If appropriate code for vehicle is not displayed or if ECM has been replaced, code ECM as follows.
Special tools
-
VAG1551/1552 Scan Tool using VAG1551/3 Adapter cable
Work sequence
-
Connect VAG1551/1552 Scan Tool.
-
Switch ON ignition but do not start engine.
-
Press -0- and -1- buttons to select Address word 01: "Engine electronics"
Display will appear as shown (I.D. example only):
038906018M 1.9l R4 EDC 00AG 1813
->
Coding 0001
WSC XXXXX
-
Press -> button.
Display will appear as shown:
Rapid data transfer
HELP
Select function XX
-
Press -0- and -7- buttons to select Function 07: "Code control module".
-
Press -Q- button to enter input.
Display will appear as shown:
Code control module
Q
Input code number xxxxx (0-32000)
-
Enter appropriate code number for this vehicle.
-
Coding tables
Engine control module coding, m.y. 1998-1999
NOTE: The following code is valid for ECM version: 038 906 018 BD.
Engine control module coding, from m.y. 2000