Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Press -Q- button to enter input.
Display will appear as shown (I.D. example only):
038906018M 1.9l R4 EDC 00AG 1813
->
Coding 0001
WSC XXXXX
-
Switch ignition OFF and then ON again.
NOTE: Entered coding is activated by switching ignition OFF and then ON again. If, after entering correct code, ignition is NOT switched OFF and ON
again, malfunction:"Control Module incorrectly coded" will become stored in DTC memory and must be erased.
-
Erase DTC memory.
-
Set Readiness code.