Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-1280003.png)
-
Release socket drive -1- and pull off grip - 2-.
-
Turn torque wrench grip -2 - 180° and reinsert socket drive.
-
Set wrench direction of turn on socket drive to counter-clockwise.
-
Set torque wrench tightening torque to 80 Nm (59 ft lb).
-
Place 6 mm hex bit socket into generator shaft.
-
Counter-hold multi-point socket 3400 with 17 mm box wrench.
-
Tighten freewheel pulley to 80 Nm (59 ft lb) by turning generator drive shaft counter-clockwise with torque wrench.
-
Clip protective cap onto freewheel pulley.
