volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Power Steering Pump, Removing and Installing|Page 6437 > < Power Steering Pump, Removing and Installing|Page 6435
Page 4
background image

-

VAG1331 torque wrench

-

VAS5024 assembly pliers

The power steering pump is not serviceable. If problems in the pump are suspected, determine the cause using pressure and leakage tests: if
malfunctioning replace complete unit.

CAUTION:  Pumps supplied as replacement parts are not filled with oil. Pumps must be filled with hydraulic oil Part No. G 002 000 and rotated by
hand before use. Otherwise the pump may be damaged or noisy during operation.

Notes:  
-

Type of oil. hydraulic oil Part No. G 002 000.

-

Oil system capacity: 0.7 - 0.9 L (11.8 - 15.2 oz.).

CAUTION:  Part numbers are listed here for reference only. Always check with your Parts department for the latest information.

Removing 

-

Remove noise insulation panel (arrows).

-

Remove left-side noise insulation (arrows).

Vehicles with TDI engine 
-

Remove intake air duct between charge air cooler and turbocharger.

Continued for all vehicles 

-

Loosen belt pulley socket-head bolt.

-

Counter-hold using hex wrench if necessary.

Power Steering Pump, Removing and Installing|Page 6437 > < Power Steering Pump, Removing and Installing|Page 6435