Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Turn tensioning device indirection of arrow to relieve tension on ribbed belt.
-
Mark direction of travel of ribbed belt.
CAUTION:
-
Using a crayon or marker, mark the direction of travel before removing the ribbed belt. Reinstalling a used belt in the opposite direction could
damage the bolt.
-
When installing the belt, make sure that it is correctly seated in the pulleys.
-
Remove ribbed belt.
-
Remove belt pulley socket-head bolt.
Removing suction pipe and suction hose
-
Remove connector off suction line.
-
Open hose clamps using VAS5024 assembly pliers.
-
Remove suction hose and suction line.
-
Clamp off return hose using 3094 hose clamp.
-
Clamp off suction hose using 3094 hose clamp.
-
Open hose clamp -1- and disconnect suction hose.
-
Remove banjo bolt -2-,
-
Seal pressure line using plastic bag or similar.