Beetle L4-1.9L DSL Turbo (ALH) (1998)
Steering Gear: Service and Repair
Power Steering Gear, Removing and Installing
WARNING:
-
Do not re-use fasteners that are worn or deformed in normal use.
-
Some fasteners are designed to be used only once, and are unreliable and may fail if used a second time. This includes, but is not limited
to, nuts, bolts, washers, circlips and cotter pins. Always follow recommendations in this data-replace these fasteners with new parts where
indicated, and any other time it is deemed necessary by inspection.
Special tools and equipment
-
3094 hose clamps
-
VAG1331 torque wrench
-
VAG1332 torque wrench
-
VAG1383A engine/transmission jack
Rules of cleanliness
-
Absolute cleanliness is required when working on the power steering system.
-
Thoroughly clean all line and hose connections and the surrounding area before disconnecting.
-
Place removed components on a clean surface and cover if not re-installing immediately.
-
Do not use fluffy rags that could leave lint.
-
Do not remove replacement parts from packaging until immediately before they are to be installed.
-
Only use packaged genuine Volkswagen components.
Removing
-
Remove screws -1-.