Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Disconnect hoses from steering gear and seal with plastic bag and adhesive tape.
-
Seal power steering gear threaded holes with plastic sealing plugs -1- and -2-,
-
Remove hex bolts -1- and -2-,
Vehicles with TDI engine
-
Separate exhaust system from subframe.
Continued for all vehicles
-
Support subframe using VAG1383A engine/transmission jack.
-
Remove hex bolts -1-.
-
Remove hex bolts -2- and -3-.
-
Lower subframe using VAG1383A engine/transmission jack.
-
Remove power steering gear bolts -1-.
-
Remove power steering gear toward right.
Installing