Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-1388002.png)
-
80 Nm (59 ft. lbs.)
12. Hex bolt
-
Always replace
-
75 Nm (55 ft. lbs.)
-
If threads in welded nut in longitudinal member are damaged, repair using Heli-coil
-
Do not repair more than one welded nut on each side with Heli-coils
13. Hex bolt
-
Always replace
-
80 Nm (59 ft. lbs.)
14. Rear axle mounting bracket
-
Check and if necessary adjust rear axle total toe after installation
-
If possible do not loosen when removing rear axle
15. Parking brake cable bracket
16. Bonded rubber bushing
17. Axle beam
-
Stub axle contact surfaces and threaded holes must be free of paint and dirt
18. ABS wheel speed sensor
19. Socket-head bolt
-
8 Nm (71 inch lbs.)
20. Spacer bushing
-
Material: zinc
-
Check for damage
21. Coil spring
-
Determine part number from parts catalog microfiche
22. Spring seat
-
End of coil spring must lie against spring seat stop
23. Hex bolt
-
Always replace
-
60 Nm (44 ft. lbs.)
24. Hex bolt
-
Always replace
-
75 Nm (55 ft. lbs.)
25. Shock absorber
26. Hex nut
-
Always replace
-
Axle beam must be in middle position when tightening nut
-
It is recommend to load rear of vehicle with weight of one person when tightening
27. Stub axle
CAUTION:
-
Do not attempt to straighten the stub axle.
-
Do not attempt to re-cut threads.
28. Stone protection plate
29. Socket-head bolts
-
Always replace
-
65 Nm (48 ft. lbs.)
30. Brake caliper
