Beetle L4-1.9L DSL Turbo (ALH) (1998)
1
Transmission housing
^
With input gear and planet carrier installed
2
Shim
3
Outer plate -B1-
^
Quantity - Refer to Specifications
4
Inner plate -B1-
^
Quantity - Refer to Specifications
5
Pressure plate
^
Install with flat side facing plates
^
Spare part must comply with transmission code letters
6
Dished washer Rounded side points toward free wheel
7
Free wheel with -B1- piston
Note:
Before removing or installing free wheel, remove valve body and take out sealing plugs.
8
Circlip
Shim -A-, determining thickness
To measure shim thickness, the transmission housing must be clamped into assembly stand so that the input gear is facing downward, as shown.
Shim thickness is determined by gap "Y" and selected from table.
x = k + 1/2 - m
^
A = Shim