Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-1019003.png)
^
x = Gap
^
l = Position of piston in free wheel
^
m = Height of plate set including pressure plate
^
K Constant = 26.9 mm
^
"K" is determined by the installation height in the transmission housing and is not adjustable.
Calculating "I":
^
Press piston in direction of arrow to stop.
^
Place straight edge "A" onto outer race of free wheel.
^
Measure to inner edge of piston with depth gauge "B".
Calculating "m":
^
Place straight edge "A" on thrust plate.
^
Compress set of plates including pressure plate in direction of arrow and measure the thickness of plate set with depth gauge "B"
^
Determine size of shims according to table:
