Beetle L4-1.9L DSL Turbo (ALH) (1998)
Fig. 2 Thrust plate and plates, installing on inner plate carrier
^
Install thrust plate -a- with smooth side facing inner plate and stepped side toward inner plate carrier.
^
Install 3 inner plates -b- and 2 outer plates -c-.
^
Clip in supporting ring with step (arrow).
Notes:
^
Position locating lugs correctly.
^
Corrugated washer and inner and outer plates, installing in clutch housing=> Fig. 3.
Fig. 3 Corrugated washer and inner and outer plates, installing in clutch housing
^
First insert corrugated washer.
^
Insert 2 mm thick outer plate.
^
Insert remaining inner and outer plates.
Fig. 4 Inner plate carrier and circlip -arrow-, installing
^
Lift inner plate carrier slightly to install circlip -white arrows-.