Beetle L4-1.9L DSL Turbo (ALH) (1998)
/Page-1047003.png)
^
Install small input shaft bolt -1- with washer -2- but without shim. Tightening torque: 30 Nm (22 ft. lbs.).
^
Install dial gauge in VW 382/7.
^
Adjust dial gauge with the top of gauge positioned on center of bolt head with 1mm preload.
^
Zero dial gauge.
^
Move small input shaft up and take reading.
Example: Reading 2.00 mm
^
Specify thickness of shim according to table and determine Part No.
Table of shims:
Example:
Measured value 2.00 mm =
Insert 1.7 mm thick shim.
^
Remove small input shaft bolt.
