Beetle L4-1.9L DSL Turbo (ALH) (1998)
-
Using VAG1756 angle measuring wrench, tighten additional 1/12-turn (30°)
Alternate final tightening of 12-point nut (if angle measuring wrench is not available):
-
Lower vehicle until wheels touch ground.
CAUTION:
-
The vehicle must be standing on its wheels when loosening or tightening the 12-point nut. Otherwise there is risk of an accident.
-
Tighten 12-point nut to 300 Nm (221 ft. lbs.) and then loosen one turn.
-
Tighten 12-point nut to 50 Nm (37 ft. lbs.).
-
Mark point on nut with line (arrow -A-).
-
Mark 2nd line (arrow -B-) on edge of wheel hub above next point.
The distance between each point is 30°.
-
Tighten 12-point nut until both lines align.