Beetle L4-1.9L DSL Turbo (ALH) (1998)
Flex Plate: Service and Repair
Drive plate, removing and installing
Special tools and equipment
^
VW 558 Counter-hold tool
^
Hex bolt M8x45 and two M10 hex nuts
^
Depth gauge
Drive plate, loosening and tightening
-
Secure VW 558 counterhold to drive plate using M8 x 45 hex bolt.
-
Place two M10 hex nuts between counterhold and drive plate.
Position of counterhold tool:
^
A - To loosen
^
B - To tighten
Drive plate, installing
-
Position drive plate and backing plate with recesses -1-.
-
Install new bolts -3- and tighten.
^
30 Nm (22 ft. lbs.)