Beetle L4-2.0L (AEG) (2000)
Camshaft: Service and Repair
Camshaft, removing and installing
Special tools and equipment
^
3415 Counter support
^
VAG1331 Torque wrench 5 to 50 Nm (3 7 to 37 ft. lbs.), or equivalent
^
VAG1332 Torque wrench 40 to 200 Nm (30 to 148 ft. lbs.), or equivalent
^
AMV 174 004 01 sealant
Removing
-
Remove intake manifold upper part
Note: Seal the open portions of the lower intake manifold against dirt etc. with clean shop rags.
-
Remove camshaft drive belt guard upper section.
-
Set camshaft sprocket to cyl. 1 TDC by turning crankshaft.
^
Mark on camshaft sprocket must align with arrow on cylinder head cover.