Beetle L4-2.0L (AEG) (2000)
Fig. 3 Removing brake caliper
-
Counterhold on guide pins and remove mounting bolts from brake caliper.
-
Remove brake caliper and hang up on body.
CAUTION:
-
Suspend brake caliper using a piece of wire or similar.
-
Do not allow the caliper to hang by the brake hose. The unsupported weight can stretch and damage the hose.
-
Remove Phillips-head screw from brake disc and remove brake disc.
-
Remove 12-point nut.
Fig. 4 Removing wheel bearing/hub unit
A - Puller, e.g. Kukko 20/2
Fig. 5 Pulling bearing inner race off stub axle
Only use puller with leg clamp -A- (e.g. Kukko 204-2) (commercial type)
Fig. 6 Pulling wheel bearing/hub unit onto stub axle