Cabrio GLX L4-2.0L (ABA) (2001)
-
Using extractor tool from wiring harness repair set VAS 1978, push out applicable terminals.
-
Disconnect wheel speed sensor wiring connector.
-
Replace faulty wheel speed sensor wiring.
-
Connect speed sensor to speed sensor wiring.
-
Secure speed sensor wiring (arrows).
Note:
^
Make sure the wiring is not twisted in the wheel well.
-
Install pin connectors in connector housing.
-
Using installation tool from VAS 1978, push individual wire seals to stop.
-
Secure terminals by engaging purple latch and install cover of multi-pin connector.