Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Remove headliner support (qty. 5 fasteners).
^
Check M-Segment fasteners (qty. 6, 3 per side), shims and washers for movement.
^
For each fastener that shims and washers are loose, remove fastener and inspect threads for damage. Replace any damaged fasteners.
^
Apply Locking Fluid Part No. D000600A2 to threads and tighten fastener to 7 ft.lbs. (9.5 NM).
Removing Middle and Rear Fasteners
To remove the middle and rear fasteners place roof in service position shown. Use special tool Part No: VAS6365, Hinge Supports -arrow-.