Eos (1F7) L4-2.0L Turbo (BPY) (2007)
/l4-2.0l_turbo_(bpy)/Page-3561003.png)
^
Prepare hinge supports by pinning them in the fully extended position.
^
Open roof with Convertible Top Operation Switch -E137- until it is just before the position shown.
^
Place hinge supports in mounting holes of main hinge.
^
Switch ignition off, roof lowers in stages until longmembers are resting on supports.
Warranty
Required Parts and Tools
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair
