Eos (1F7) L4-2.0L Turbo (BPY) (2007)
-
Remove lower engine compartment cover (sound insulation). See: Body and Frame/Sound Proofing / Insulation/Service and Repair/Procedures
-
Remove oil drain plug -1- and drain oil.
-
Loosen lower portion of filter housing -3- at the hex -2- or circumference -4- and remove.
-
Remove old air filter element.
-
Thoroughly wipe oil filter housing with a shop cloth.
Installing
-
Install new filter insert -2- and O-ring -3-.
-
Tighten lower part of filter -4- at hex head to 25 Nm.
-
Install drain plug -6- with new seal -5- and tighten to 10 Nm.
Installation is reverse of removal.