Eos (1F7) L4-2.0L Turbo (BPY) (2007)
Lamp socket -2- has an anti-twist mechanism - A arrows -.
-
Guide lamp recess -arrow- into headlamp anti-twist mechanism - A arrows -.
Press lamp -1- into reflector retaining tabs - 3 and 4 -.
NOTE:
-
The lamp must engage audibly.
-
When installing housing cover, check for proper fitting. Water intrusion will damage headlamp.
-
Check headlamp for function.
CAUTIONS: If this bulb is replaced, the headlamp adjustment must be then checked and adjusted if necessary.
Replacing bulbs for front turn signals manufactured by Valeo
Removing:
CAUTION: Note usage and safety notes for halogen lamps
NOTE: During removal and installation, leave ignition key with remote control inside the vehicle to prevent the doors from locking and possibly
activating the "Coming Home / Leaving Home" functions on its own.
In order to be able to replace the bulb, it is sometimes necessary to remove neighboring components at the corresponding headlamp.
-
Refer to the following table as to which components are to be removed depending on engine version, in order to replace the bulb.
NOTE:
-
The following illustrations depict replacement of lamp at right headlamp.
-
Replacement of bulb at left headlamp is performed analogously.
-
Disengage retaining bracket -3- from housing cover -1- and remove housing cover from retainers -arrows-.