Eos (1F7) L4-2.0L Turbo (BPY) (2007)
NOTE:
-
Lamp -1- is clipped into the reflector.
-
When removing lamp -1-, the harness connector is not disconnected first.
-
Press retaining tabs -arrows- of lamp socket together and pull lamp socket with lamp out of reflector.
-
Pull the lamp socket -1- with parking lamp out of reflector as far as the wire lengths permit.
-
Remove parking light -2- from lamp socket -1- in -direction of arrow-.
Installing:
Install in reverse order of removal, noting the following:
-
Push lamp socket into reflector.
NOTE:
-
The lamp socket must engage audibly.
-
When installing housing cover, check for proper fitting. Water intrusion will damage headlamp.
-
Check headlamp for function.